2024-2025 Student Catalog 
    
    Nov 24, 2024  
2024-2025 Student Catalog

Apply Today

Radiologic Technology, A.A.S.



Contact Information

Program Requirements

Typical Program

Degree/Certificate:   Associate in Applied Science
HEGIS Code:           5207
SUNY Code:            0628
Major Code:            RADT

The Career

Radiologic technologists are essential in contemporary health care. Radiologic technologists assist radiologists in determining diagnoses by performing radiologic procedures. These procedures include the use of proper radiation safety standards, as low as reasonably achievable (ALARA). Technologists utilize their radiography and patient care skills to perform optimum radiographic images. After performing the procedure, the technologist critiques the images. Employment opportunities exist in a wide variety of health care settings such as hospitals, clinics, private physicians’ offices and government agencies.

The SUNY Niagara Approach

SUNY Niagara’s program is rigorous and takes two years, including two summer sessions, to complete. The program includes lecture, laboratory and extensive clinical experience. The program is designed to prepare students to possess entry-level skills required of the radiologic technologist. The program is accredited by the Joint Review Committee on Education in Radiologic Technology anf graduates are eligible to apply for the American Registry Examination for Radiologic Technologists (ARRT) and are recognized by the New York State Department of Health. Graduates must comply with the rules and regulations of the New York State Department of Health and ARRT prior to taking the credentialing examination. Enrollment is limited due to clinical availability.

The radiography program at SUNY Niagara is accredited by the
Joint Review Committee on Education in Radiologic Technology
20 North Wacker Drive, Suite 2850
Chicago, IL 60606-3182
312-704-5300
Email: mail@jrcert.org

To view current award letter and program effectiveness data please go to the JRCERT’s webpage:

https://www.jrcert.org/programs/niagara-county-community-college/

Program Mission Statement, Goals and Program Learning Outcomes

The mission of the SUNY Niagara Radiologic Technology program is to provide students with educational experiences to become competent, entry-level technologists within the health care field.

Goal 1:  Students will demonstrate clinical competence
Student Learning Outcomes: 

  • Students will exhibit proper positioning skills
  • Students will select technical factors
  • Students will practice radiation protection
  • Students will exhibit quality patient care skills

Goal 2:  Students will develop critical thinking skills
Student Learning Outcomes:

  • Students will perform non-routine procedures
  • Students will perform image analysis

Goal 3:  Students will demonstrate effective communication skills
Student Learning Outcomes:

  • Students will demonstrate written communication skills
  • Students will demonstrate oral communication skills

Goal 4:  Students will display professionalism
Student Learning Outcomes:

  • Students will demonstrate professional behavior
  • Students will recognize ethical values

The mission statement, goals, student learning outcomes and other policies for the Radiologic Technology program are also available to students, faculty, administration and the public in the Student Radiography Manual that is on reserve in the Henrietta G. Lewis Library on campus or room C-210, the Radiologic Technology Program office.  Female applicants should be aware that a pregnancy policy is published and available.

Program Effectiveness Data

The following is the most current program effectiveness data for the AAS degree in Radiologic Technology at SUNY Niagara . Our accreditation agency, the Joint Review Committee on Education in Radiologic Technology (JRCERT), defines and publishes this information.  Click here to go directly to the JRCERT webpage.

Credentialing Examination: The number of students who pass, on the first attempt, the American Registry of Radiologic Technologists (ARRT) certification examination, or an unrestricted state licensing examination, compared with the number of graduates who take the examination within six months of graduation. The five-year average benchmark established by the JRCERT is 75%.

 

Credentialing Examination Rate

number passed on 1st attempt divided by number attempted within 6 months of graduation

Year Results
Year 1 - 2019 40 of 42  - 95%
Year 2 - 2020 30 of 38  - 79%
Year 3 - 2021 35 of 46  - 76%
Year 4 - 2022 18 of 22  - 82%
Year 5 - 2023 32 of 36  - 89%
Program 5-Year Average 155 of 184  - 84%

Job Placement: The number of graduates employed in the radiologic sciences compared to the number of graduates actively seeking employment in the radiologic sciences within twelve months of graduating. The five-year average benchmark established by the JRCERT is 75%.

Job Placement Rate

number employed divided by number actively seeking employment within 12 months of graduation

Year Results
Year 1 - 2019 38 of 39  - 97%
Year 2 - 2020 32 of 33  - 97%
Year 3 - 2021 43 of 44  - 98%
Year 4 - 2022 20 of 20  - 100%
Year 5 - 2023 29 of 30  - 97%
Program 5-Year Average 162 of 166  98%

 

Program Completion: The number of students who complete the program within the stated program length. The annual benchmark established by the program is 60%.

Program Completion Rate 

number graduated divided by number started the program

Year Results
Year  -  2023 36 of 74
Annual Completion Rate 49%

Admission & Curriculum Change Requirements

Students admitted in fall.

All applicants must meet the following admission requirements:

  1. High school diploma or equivalency diploma.
  2. High school average of at least 75 percent for all mathematics and science courses. A grade of 75 or higher for high school mathematics through geometry or at least a grade of C in MAT 110 or higher level. A grade of 75 or higher for high school biology (with a lab) or at least a grade of C in BIO 109 or BIO 117 (with a lab), or higher level. A grade of 75 or higher in high school chemistry and/or physics or at least a grade of C in PHS 101 or CHE 120 or PHY 131, with a lab.
  3. Applicants will be tested for academic foundations in reading and mathematics. To be accepted into the program, applicants must earn the minimum required score on these tests or pass the academic foundations course listed below.
If below the required score in       Will need to pass
  Reading      AAC 042 or ENG 099 or ENG 088*
  Mathematics      MAT 012 or MAT 023

*These academic foundations courses do not count toward the degree.

Enrollment is limited due to clinical availability.

If college-level courses were completed prior to the student starting in the Radiologic Technology program and these courses are to be used to fulfill degree requirements, a minimum program GPA of 2.0 is required.

Individuals who have questions regarding their qualifications should contact the Admissions Office at 614-6200.

Individuals who previously attended SUNY Niagara and who would like to apply to the Radiologic Technology program should contact the Admissions Office. Students who are currently attending SUNY Niagara, are not matriculated in any program and would like to apply to the Radiologic Technology program should also contact the Admissions Office. Students who are currently attending SUNY Niagara, are matriculated in another program and would like to apply to the Radiologic Technology program should contact the Student Development Center.

Requirements to Remain in the Program

Once accepted into the Radiologic Technology program, continued matriculation is contingent upon:

  1. An acceptable student physical examination report. Health records including a physical exam and immunizations must remain current for the entire period of enrollment in the Radiologic Technology program. The student is responsible for all costs related to the physical examination report.
  2. In order to meet the Student Learning Outcomes of the Radiologic Technology program, certain essential technical activities are required. These essential technical activities are available from the Wellness Center. The student must meet technical standards based on the results of the physical examination.
  3. Certification in Adult, Infant and Child CPR is required prior to entering RAD 103. This requirement may be fulfilled through successful completion of HED 214 or an equivalent program offered by the American Red Cross, American Heart Association or National Safety Council. Online certification is not acceptable.  Certification must remain current throughout the program.

Policies

Grading Policy: Some Radiologic Technology clinical courses (RAD 103, 202, 204) have three components: lecture (theory), college laboratory and clinical education. A student must earn a minimum C grade in lecture (theory) and a satisfactory S grade in the College laboratory and clinical education components. If a student is not successful in each component, the resulting grade will be an F for the course. Grades of C minus will not be accepted.

A minimum C grade is required for Radiologic Technology non-clinical courses (RAD 100, 101, 112, 201, 203, 212, BIO 246).

Repeat Policy: In the sequence of Radiologic Technology clinical courses (RAD 103, 104, 202, 204, 205) a student who fails (F grade) may repeat only one clinical course in the sequence. A student who is failing at the time of withdrawal from a clinical course (W grade) or withdrawal from the College (X grade) may repeat only one clinical course in the sequence. This policy does not affect a student who is passing a clinical course at the time of withdrawing from the course or the College.

All prerequisite and corequisite Radiologic Technology courses must be successfully completed before progressing to the next sequential Radiologic Technology course.

Minimum Grade in Anatomy and Physiology for Radiologic Technology Students: A minimum C grade in anatomy and physiology lecture and lab (BIO 213, 214) must be obtained for successful progression and completion of the Radiologic Technology program.  Failure to obtain a grade of C or higher will result in loss of matriculated status.

Matriculated Status: All students matriculated in the Radiologic Technology program must begin RAD 100 and RAD 101 their first semester of matriculated status. If students do not begin RAD 100 and RAD 101 their first semester of matriculated status, they will lose matriculated status and must reapply to the program.

Students must maintain continuous registration in Radiologic Technology prerequisite and corequisite courses to remain matriculated in the Radiologic Technology program.

  1. Any student who fails or withdraws from RAD 100, 101, 112, 103, 104, 201, 202, 203, 204, 205, 212, BIO 213, 214, 246 or any prerequisite courses or co-requisite courses that are necessary for continuing in the Radiologic Technology program will lose matriculated status in the Radiologic Technology program.
  2. Any student who does not register the following consecutive semester for the next Radiologic Technology course(s) or any corequisite courses that are necessary for continuing in the Radiologic Technology program will lose matriculated status in the Radiologic Technology program.

Students will be advised of their options if they lose matriculated status.

Standard of Ethics Policy: When a student is unable to provide safe patient care and/or does not meet the ethical standards of the Radiologic Technology profession, in either the Academic or Clinical Education settings, the Radiologic Technology Program Coordinator, upon the recommendation from the Radiologic Technology Faculty, will remove said student from the Radiologic Technology course and this action may result in dismissal from the Radiologic Technology program. Unsafe care is defined as “placing the patient and/or family in clear and present danger.” This may include, but is not limited to: radiographic exposure of the wrong patient or body part, unsafe patient transfer, violations or infractions of ALARA (As Low As Reasonably Achievable), breaches of the Health Insurance Portability and Accountability Act (HIPAA) and violations of the Student Conduct Code. The student is not eligible for re-admission into the Radiologic Technology program. 

Five-Year Course Policy: If a student has taken any course with a RAD or BIO prefix five or more years before enrolling in a subsequent RAD or BIO course, the course must be repeated. A waiver may be requested, but will need to be approved by the coordinator.

Program Requirements (RADT)


  1. A total of at least 69-credit hours with a minimum curriculum grade-point average of 2.0. Academic Foundations courses do not count toward the degree.
  2. Radiology Technology: A minimum of 46-credit hours to include:
    RAD 100 - Introduction to Radiologic Technology *
    RAD 100L - Introduction to Radiologic Technology Lab  
    RAD 101 - Radiologic Technology I *
    RAD 112  -  Radiologic Technology II 
    RAD 103 - Radiographic Procedures I 
    RAD 103C - Radiographic Procedures I Clinic  
    RAD 103L - Radiographic Procedures I Lab  
    RAD 104 - Clinical Education I 
    RAD 201 - Radiologic Technology III 
    RAD 202 - Radiographic Procedures II 
    RAD 202C - Radiographic Procedures II Clinic  
    RAD 202L - Radiographic Procedures II Lab  
    RAD 203 - Radiologic Technology IV 
    RAD 204 - Radiographic Procedures III 
    RAD 204C - Radiographic Procedures III Clinic  
    RAD 204L - Radiographic Procedures III Lab  
    RAD 205 - Clinical Education II 
    RAD 212 - Seminars in Radiologic Technology  
  3. Biological Sciences: A minimum of 12-credit hours to include the following classes and a minimum of 10-credit hours of Natural Science & Scientific Reasoning (NSCI):
    BIO 213 - Human Anatomy and Physiology I *
    BIO 213L - Human Anatomy and Physiology I Lab  
    BIO 214 - Human Anatomy and Physiology II 
    BIO 214L - Human Anatomy and Physiology Lab II  
    BIO 246 - Radiation Biology/Protection  
  4. Computer Technology: A minimum of 1-credit hours selected through advisement
  5. Communication - Written (COMW) and Communication - Oral (COMO): A minimum of 6-credit hours to include:
    ENG 101 - Writing I 
    General Education approved elective that meets COMO
  6. Diversity: Equity, Inclusion & Social Justice General Education:  A minimum of 3-credit hours to include:
    SOC 101  -  Introduction to Sociology  
  7. Mathematics and Quantitative Reasoning General Education (MATH): A minimum of 1-credit hours to include:
    MAT 199  -  Mathematics for Radiologic Technologists  
  8. A minimum grade of C in all RAD and BIO courses.

Typical Program


Total Credit Hours: 15


Total Credit Hours: 16



 

Summer Session


Total Credit Hours: 2


Total Credit Hours: 17


Total Credit Hours: 17


Summer Session


Total Credit Hours: 2


Note:


 * Dependent upon the fulfillment of Academic Foundations requirements.

Additional Costs


Students must purchase uniforms or lab coat and profession-specific equipment. Detailed information can be obtained by contacting the Radiologic Technology program at 614-6416.

Some clinical affiliations are geographically dispersed from the main campus.  These affiliations include:

  • Bertrand Chaffee Hospital–Springville, NY
  • United Memorial Medical Center–Batavia, NY
  • Wyoming County Community Health System–Warsaw, NY

Transportation to and from all clinical affiliations is the responsibility of the student.

Scholarship Opportunities


There are several scholarships available to SUNY Niagara students. Scholarship deadline dates vary each semester.  For more information, please visit the scholarship webpage at www.niagaracc.suny.edu/scholarships. The SUNY Niagara Foundation/Scholarship Office is located within the Foundation Office, A-265 or by phone (716) 614-5910.